MG 12-12 VDC 8 A -i

DC/DC voltage stabilizer MG 12-12 VDC 8 A -i. Delivers a constant output voltage to protect sensitive electronic equipment. Always 12 VDC and 8 A regardless of fluctuations in the supply voltage from your battery. Galvanic isolated, which means that the power circuits are separated.

Compare this product

Galvanic isolated

Voltage stabilization

Electronic process, high efficiency, low heat output

Compact, fast and plug-and-play installation

Can be run in parallel for high-demand appliance

Silent, no humming, only temperature-controlled fans for cooling

Product specifications

ARTICLE NUMBER
60110019	MG 12/12-08-i

DIMENSIONS & WEIGHT
Length x width x height, mm (in.)	50 x 151 x 88 (2 x 5.9 x 3.5)
Weight, kg (lb.)	0.63 (1.4)

TECHNICAL SPECIFICATIONS
Converter type	voltage stabilization

INPUT
Nominal input voltage	12 VDC
Input range, specifications met	9 .. 18 VDC
Input range, no defects	0 .. 18 VDC

OUTPUT
Nominal output voltage	12.5 VDC
Voltage adjustable	Yes
Output accuracy	3%
Ripple, peak output voltage	1%
maximum power output	110 W
continuous output power	110 W
Maximum output current	8 A
Continuous output current at 40 °C	up to 8 A

GENERAL
efficiency	>87%
consumption no load	<25 mA
Ambient operating temperature	-10°C .. +40°C
Storage temperature	-25° .. +85°C
Relative humidity in use	up to 95%, non-condensing
Galvanic isolation	Yes, 500 Vac
Cooling	Mechanical

PROTECTIONS
Current / short circuit	Restricted by current rating
Overheating, shut down	Power restricted by temperature

MECHANICAL SPECIFICATIONS
Faston in / off, max thread thickness	6 mm²
Mounting holes	dia 4 mm, rh 58 x 143
International Protection rating	IP20
Housing	frame 6
Housing material	Anodized aluminium, ABS end caps
Housing colour	RAL 9011 graphite black
Meets the following Standards	EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4-3), LVD 2006/95/EC (EN60335-1), Automotive EMC 2004/104/EC, RoHS 2011/65/EU Note: The above specifications are subject to change without prior notice.