WBL 120

WhisperPower Battery Links are smart switch regulators that automatically connect two battery banks if the charge voltage rises above a certain value for at least five seconds. This means that the battery banks can be charged from the same source. To protect the battery banks they are separated from each other as soon as the voltage drops.

Compare this product

Simultaneous charging of two batteries

Intelligent battery monitoring function

Safe connect algorithm

Temporary additional power with start assist function

Simple to install, no programming required

Compact and robust

Automatic isolation with voltage drop

Remote control possible (optional)

Connect battery banks in parallel for emergency start

LED indicators

Product specifications

ARTICLE NUMBER
60110120	WBL 120

DIMENSIONS & WEIGHT
Length x width x height	46 × 46 x 80 mm (1.8" x 1.8" x 3.2" inch)
Weight	125 grams (0.3 lb.)

TECHNICAL SPECIFICATIONS
Continuous capacity	120 A
Peak capacity /inrush current 10s	180 A
Input voltage	9 .. 35 VDC
Operating temperature	-40 .. 65°C
Maximum voltage drop	0.5 VDC (Approx. 10s delay during disconnection)
Maximum allowable voltage difference	8.0 VDC

AUTOMATIC OPERATION
Switch-on voltage (minimum)	>13 V at 12 V / >26 V for 24 V installations
Connection delay	5 sec.
Switch-on voltage (maximum)	15.0 V at 12 V / 30.0 V for 24 V installations
Disconnection voltage	12.75 V at 12 V / 25.5 V for 24 V installations

DC-CONSUMPTION
OFF-Mode (relay not powered)	1.0 mA at 12 V / 1.1mA at 24 V
ON-Mode (inrush current)	0.5 A at 12 V / 0.4 A at 24 V
ON-Mode (relay powered)	50 mA at 12 V / 40 mA at 24 V

LED STATUS
On	Relay connected
Flashing slowly (0.5Hz)	Delay whist connecting
Flashing fast (2.5Hz)	Alarm: Relay not powered as voltage difference is too big in OFF-Mode (>8.0 VDC) or due to voltage drop being too large in ON-Mode (0.5 VDC)

CONFORMITY
CE	Yes

WBL 120

Product specifications

Downloads

Related products

WBL 100

WVG 200

WBI 180 A | 3 Outputs | IG

WBL 140