50214740 front
50214740 front

Modular Battery Protect Relay 24 V / 500 A

The DC Modular Battery Protect Relay has the same capabilities as the Remote Battery Switch. It is a smart high current magnetic latching contactor, that can handle continuous DC currents of up to 500 Amps.

Whereas the Remote Battery Switch is mainly used as a locally or externally controlled battery load switch, the Modular Battery Protect Relay has a number of additional features. Most importantly, it can protect your battery without the need for an external measurement and control device.

  • Local Open and Close buttons on top, to manually override the switch state
  • Stainless steel studs, washers and nuts for optimal corrosion resistance
  • Robust transparent covers with breakouts to allow wire access from any direction
  • Smart terminal design allows dual mirrored cable lug connections

Spécifications du produit

NUMÉRO D'ARTICLE
50214739Modular Battery Protect Relay 24 V / 500 A
DIMENSIONS ET POIDS
Weight (Kg)0.8
Dimensions (mm)50 x 94 x 150
CIRCUIT DE CONTACT (ÉLECTRIQUE)
Maximum voltage60 VDC
Nominal current @ 25°C500 A (see Precaution #2)
Cranking current (1 minute)1000 A
Nominal make / break current500 A (0 .. 34 Vdc) 350 A (35 .. 60 Vdc)
Peak make / break current1600 A (0 .. 34 Vdc) 1200 A (35 .. 60 Vdc)
CIRCUIT DE COMMANDE (ÉLECTRIQUE)
Coil / supply voltage (+Vdc)15 - 34 VDC
Coil / supply current (idle state)< 100 μA
Coil / supply current (state change)< 3 A
GÉNÉRALE
Remote controlBy control wires
Local controlOn/Standby, Open and Close contact, Override mode
Automatic disconnect and reconnectYes (10 individually programmable disconnect and reconnect voltage levels)
IndicatorsContact open/close, Undervoltage disconnect, Override mode, Error and Setup
Protected againstHigh temperature, High/Low supply voltage, Ignition (ISO 8846)
Mechanical life100000 cycles
Electrical life10000 cycles
Operating temperature range-20 .. +60°C
Connection studs / DCM grid sizeM10 / 1 x 3
Protection classIP 65
StandardsEMC: 2014/30/EU, Low voltage directive: 2014/35/EU, RoHS: 2011/65/EU, Automotive: EN 50498, ISO 8846

Téléchargements

Produits connexes

50214737 FrontArt. Nr.: 50214737Art. Nr.: 50214737

Modular Battery Protect Relay 12 V / 500 A

Voir le produit
50214733 FrontArt. Nr.: 50214733Art. Nr.: 50214733

Remote Battery Switch 12 V / 500 A

Voir le produit
50214712 FrontArt. Nr.: 50214712Art. Nr.: 50214712

DC Switch 500 A

Voir le produit
50214711 FrontArt. Nr.: 50214711Art. Nr.: 50214711

DC Switch 600 A on-off

Voir le produit