AC Transfer System Switch 16
AC Transfer System Switch 16

AC Transfer System Switch 5

These analogue switching devices are able to feed the onboard power supply from three different sources: shore power, generator and inverter. There are three output circuits, available with different capacities. As an alternative solution, it is also possible to install two standard WhisperSwitches.

• switch from shore to generator
• switch between generator and inverter

Spécifications du produit

NUMÉRO D'ARTICLE
50214690AC Transfer System Switch 5
DIMENSIONS ET POIDS
Weight (Kg)4.4 / 9.7 lb
Dimensions (hxwxd)340 x 261 x 144 mm / 13,4 x 10,3 x 5,7 inch
SPÉCIFICATIONS GÉNÉRALES
Power rating5 kW
Nominal input voltage230 V (50/60 Hz)
Input voltage range200-250 V
No. of AC inputs3 (shore, generator, inverter)
No. of AC outputs3 output groups
SPÉCIFICATIONS TECHNIQUES
LED indicators on cabinetPower sources present indication and 'load on inverter' mode
Nominal input current generator25 A
Nominal input current shore power25 A
Nominal input current inverter25 A
Earth leakage switchNot integrated
Input generator monitoringContinuous voltage and frequency monitoring
Delay generator input0-10 sec (adjustable)
Nominal output Short circuit current25 A
Nominal output current25 A
Automatic fusesNo, depends on system
Energy consumption (AC, all inputs)27W
Power consumption (inverter capacity only)< 1W
Switching timeswitch on 12-22 ms / switch off 4-19 ms
Temperature range (specified)-5°C to 60°C / 23 to 140°F
Temperature range (ambient)-25°C to 70°C / -13 to 158°F
Temperature range (not working)-60°C to 80°C / -76 to 176°F
Relative humiditymax. 95%, non-condensing
Frequency monitoringYes
Cable diameter0.5-10 mm2/AWG 20-7, remote control 0.14-2.5 mm2/AWG 26-13
International Protection ratingIP23